| DC VOLTAGE |
48
|
| RATED CURRENT |
2.5
|
| CURRENT RANGE |
0 ~2.5A
|
| RATED POWER |
120
|
| RIPPLE & NOISE |
150mVp-p
|
| VOLTAGE ADJ.RANGE |
48 ~ 58V
|
| VOLTAGE TOLERANCE |
±1.0%
|
| LINE REGULATION |
±0.5%
|
| LOAD REGULATION |
±0.5%
|
| SET UP, RISE TIME |
2000ms, 70ms, 50ms/400VAC 2000ms, 70ms, 10ms/230VAC at full load
|
| INPUT VOLTAGE RANGE |
180 ~ 550VAC 254 ~ 780VDC
|
| FREQUENCY RANGE |
47 ~ 63Hz
|
| EFFICIENCY |
92% / 400V
|
| AC CURRENT |
0.7A/400VAC 1.2A/230VAC
|
| INRUSH CURRENT |
COLD START 50A
|
| LEAKAGE CURRENT |
<3.5mA / 530VAC
|
| OVERLOAD |
105 ~ 130% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed
|
| OVER VOLTAGE |
Protection type : Shut down o/p voltage, re-power on to recover 60 ~ 67V
|
| OVER TEMPERATURE |
Shut down o/p voltage, recovers automatically after temperature goes down
|
| DC OK SIGNAL |
Relay contact rating(max.) : 30V / 1A resistive
|
| WORKING TEMP |
-25 ~ +70℃ (Refer to "Derating Curve")
|
| WORKING HUMIDITY |
20 ~ 90% RH non-condensing
|
| STORAGE TEMP HUMIDITY |
-40 ~ +85℃, 10 ~ 95% RH
|
| TEMP. COEFFICIENT |
±0.03%/℃ (0 ~ 50℃)
|
| VIBRATION |
Component: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting clip: Compliance to IEC60068-2-6
|
| SAFETY STANDARDS |
Ul508 approved, IEC60950-1 CB approved by SIQ, design refer to GL;(meet EN60204-1)
|
| WITH STAND VOLTAGE |
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC
|
| ISOLATION RESISTANCE |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
|
| EMC EMISSION |
Compliance to EN55011 (CISPR11), EN55022 (CISPR22), EN61204-3 Class B
|
| EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61204-3, EN61000-6-2 (EN50082-2), heavy industry level, criteria A
|
| MTBF |
268K hrs min. MIL-HDBK-217F (25℃)
|
| DIMENSION |
40*125.2*113.5mm (W*H*D)
|
| PACKING |
0.65Kg; 20pcs/14Kg/1.16CUFT
|